Below is the description to every product included in this bundle, along with the specifications and a link to each individual product!
1x) 2014+ 4Runner Slimline Hybrid Front Bumper With 20″ Heise Cutout, Winch Access Holes, and Bull Bar
- 20″ Heise LED Light Bar Cutout
- Universal Cutout meaning winch holes in the face for easy access to the winch solenoid.
- Angled bullbar for radiator protection (TSS Compatible)
- Powdered Matte Black
- Weighs only 40 lbs more than OEM components
- Constructed of 1/8″, 3/16″, and 3/8″ all American steel
- 10,000 lb capacity winch capable
- 3/4″ weld through shackle mounts
- Bolts, nuts, edge trim, and SR5 template are included
- 100% Made in the USA right here in Baton Rogue, Louisiana
1x) Heise SL 20″ Light Bar
- Input Voltage: 10-30V DC
- Wattage: 45W (15-3W OSRAM LEDs)
- Raw Lumens: 4050
- Color Temperature: 6000K
- Beam Pattern: combo/flood (90 degree)—spot (8 degree)
- Housing Material: powder-coated aluminum
- Housing Color: black
- Membrane: Gore™
- Lens Material: PC
- Mounting Bracket: die-cast aluminum
- Mounting: side and bottom
- Hole Dimensions: brackets turned outward – 22.25"
- Mounting Bolt Drill – .25"
- Electronics: integrated-epoxy encapsulated
- Hardware: stainless 316
- Operating Temperature: -40degC to +60degC
- Current Consumption: 2.4 amps at 13.8 volts
- IP Rating: IP67
- Protections: reverse polarity
1x) Premium LED Light Wiring Harness
Universal [14 AWG 14 ft 1 Lead] Copper Led Light Wiring Harness On/Off Rocker Switch – LED LIGHT BAR
1 lead 14 AWG 14 ft Heavy Duty Wiring Harness is designed and matched for high output light bars which have substantially higher amperage draw than their smaller counterparts. With the harness, one can power up a heavy-duty HID LED light bar or LED work light with the on/off switch. Composed of 14 gauge wires and a 40 amp relay, the off-road light wiring harness can be used to power up the largest 300 Watt LED off-road light bar and even the largest LED offroad light bar available in the market. This wiring harness for LED off-road lights simplifies the installation process of powering various equipment on all automobiles.
The off-road light wiring harness is compatible with all vehicles or boats that use a 10-30v DC power source. The wiring harness for LED off-road lights is the perfect accessory for off-road vehicles, working vehicles, and all automobiles. Basically, any car battery will work on this wire harness. Just connect your lights to your batter and flip the switch.
Work for 5″ – 52″ LED work light bar & all types of LED work light
IP65 waterproof etched Backlit LASER ROCKER on/off SWITCH for easy control
40A power relay
15A In-line safety blade fuse
1 set of power connectors to light fixtures
More than 14ft of wiring from battery to light fixture
1 x 1 lead Wiring Harness
Wiring kit with etched backlit LASER ROCKER on/off SWITCH for the two LED light.
1. connect the red+ wire from the fuse to battery +; connect the black wire from the relay to the battery -;
2. connect the wire for the lights bar from the relay; (red/black correspond to the wire of lights bar)
3. turn on/off button of the switch to test the lights bar.
2x) Red Smittybilt 3/4″ D-Rings
Designed for high quality towing
Made from strong material
Plated with zinc coating
Ensures easy installation
1x) Smittybilt X20 Gen2 10,000LB Waterproof Wireless Winch With Synthetic Rope
- Not Vehicle Specific
- Waterproofing: IP68 Rating
- Rated line pull = 10,000lbs. (4,545kgs) Single Line
- Motor: 6.6hp Series Wound
- Control: Remote Switch, 12 ft. (3.7m) lead
- Gear Train: 3-Stage Planetary
- Gear Ratio: 218:1
- Clutch: Sliding Ring Gear
- Brake: Automatic Out-Of-Drum
- Drum Size: Diameter 2.5 inch
- Cable: 98.5 feet 3/8 inch Diameter
- Cable type: synthetic rope
- Fairlead: Hawse
- Remote control Included
- Integrated Wireless Remote
- Recommended Battery: 650CCA Minimum for Winching
- Battery Leads: 25mm2, 72 inch(1.83m)1
- Finish: Textured black
- Weight: 67.0lbs. (30.4Kgs)
- Mounting Bolt Pattern: = 10.0 inch x 4.5 inch
- Overall Dimensions: (L x W x H) 22.3 x 5.4 x 9.4
1x) Southern Style Offroad License Plate Bracket
License Plate Bracket
Looking for a way of running a winch and front license plate?
This is our flip-up designed license plate bracket that still allows you access to your winch line. Simple bolt-on design that goes between your bumper and fair lead. Already have your winch installed? No problem, we designed this bracket with an opening allowing it to be installed without worrying if you will need to remove the winch line hook.
2x) Southern Style Offroad Universal Access Hole Covers (Black)
These are bumper hole covers that fit into the Universal Access holes in the Southern Style Offroad Slimline Hybrid Bumpers and the Versa Bumpers.
- They are sold in pairs
- Color Black
- 2 Piece construction per side
- 3D printed, construction is plastic
These will easily be pressed into the Universal Access Holes. No tools are needed.
These will ONLY work with our SSO Slimline Hybrid Bumper with the Universal Access Holes (aka winch access holes, hand holes, side winch holes) or the SSO Versa Bumper.
-If at anytime you need to modify or change this order after placing the order you are subject to a $50 order change fee!
-If you’re looking to add some extra protection with your Southern Style Offroad 2014+ 4Runner Slimline Hybrid Bumper check out our Stage 2 kit found here
-Bumpers are fabricated upon order and are shipping approximately 10-14 weeks from date of order. Lead times are subject to vary due to any current sale promotions and volume of orders in house, as well as, supply chain availability.
-FedEx Ground, all 48 contiguous US states. Call 225.726.7979 for rates to Alaska, Hawaii, Canada & other shipping addresses outside of the 48 contiguous US states
-Our Southern Style OffRoad products are made-to-order items that are fabricated individually according to the customer’s requests. To deliver the desired products within estimated lead times, we start to process your order on the day the order was placed. The initial process begins by ordering needed metal specific to your order therefore Southern Style OffRoad has a 20% fee on all cancelled orders. Returns are subject to a 20% restocking fee and will only be accepted for manufacturing defects. SSO will not issue an RMA for items that have been installed.