Standard Led Light Wiring Harness

$21.99

Standard LED Light Wiring Harness with Red Toggle Switch

Features:

  • 40A Power Relay & 30A Blade Fuse
  • 2 sets of power connectors to light fixtures
  • Illuminated Rocker Switch On/Off Rocker LED
  • Compatible with power source from 10 to 30 Volt DC.

Product Content:

  • Power Relay (40A)
  • Blade Fuse (30A)
  • 2 sets of power connectors to light fixtures
  • Illuminated Rocker Switch On/Off Rocker LED
  • User Manual
SKU: AE-005-1 Categories: , , Tags: ,

Description

Standard LED Light Wiring Harness with Red Toggle Switch

 

Features:

  • 40A Power Relay & 30A Blade Fuse
  • 2 sets of power connectors to light fixtures
  • Illuminated Rocker Switch On/Off Rocker LED
  • Compatible with power source from 10 to 30 Volt DC.

Product Content:

  • Power Relay (40A)
  • Blade Fuse (30A)
  • 2 sets of power connectors to light fixtures
  • Illuminated Rocker Switch On/Off Rocker LED
  • User Manual

Installation:

  1. Choose your desired mounting location for the switch. Mark and drill one 3/4″ hole.
  2. Use a sheet metal screw to mount the relay around the battery. Make sure the RED wire from the relay can be connected to the positive terminal of the battery while the BLACK wire can be grounded to the chassis.
  3. Connect the WHITE wires to the positive input line of the auxiliary lights.
  4. Connect the BLACK wires to the ground connection line of the auxiliary lights.
  5. Connect and install the WHITE wire from the relay to the middle pin of the switch (COPPER colored).
  6. Link the RED wire to the outer pin (COPPER colored) of the switch then route and connect it to a steady power source. Please make sure to use an in-line fuse rated at a minimum of 3A 12V DC when connecting this power feed wire directly to the battery. As your other option, you can also install this wire into an existing power wire in the cabin or into the cabin fuse box and this will exclude the need of an inline fuse.
  7. Attach the BLACK wire to the pin of the switch (GOLD colored), route it then connect it to the ground chassis.
  8. Finally, push the switch into the 3/4″ hole that you drilled out (Step 1)

Additional information

Weight 3 lbs